SAFETY GAS TAP — 22S — POWER CONTROL CAPABILITY 0-20.0 KW

• 2 way safety gas tap suitable for pilot flame
• Multigas
• Suitable for burners Series 65 and Series 92
• Inlet tube Ø 12 mm
• Outlet tube Ø 12mm
• Pilot tube Ø 4-6 mm
• Thermocouple joint M9
• CE approved

SAFETY GAS TAP — 21S/C — POWER CONTROL CAPABILITY 0-10.0 KW

• Connection to the manifold by clamp
• 2 way safety gas tap suitable for pilot flame
• Multigas
• Suitable for burners Series 04 and Series 65
• Inlet tube (manifold) Ø 1/2″ — 21 mm
• Outlet tube Ø 10 mm
• Pilot tube Ø 4-6 mm
• Thermocouple joint M9
• CE approved

SAFETY GAS TAP — 21S — POWER CONTROL CAPABILITY 0-10.0 KW

• 2 way safety gas tap suitable for pilot flame
• Multigas
• Suitable for burners Series 04 and Series 65
• Inlet tube Ø 10 mm
• Outlet tube Ø 10 mm
• Pilot tube Ø 4-6 mm
• Thermocouple joint M9
• CE approved

SAFETY GAS TAP — POWER CONTROL CAPABILITY 0-6.0 KW

• 1 way safety gas tap
• Multigas
• Suitable for burners Series 04 spark plug ignition version
• Inlet tube Ø 1/2 -21 mm
• Outlet tube Ø 8 mm
• Thermocouple joint M8
• CE approved

DEEP-FRYER SAFETY GAS THERMOSTAT — MINISIT — POWER CONTROL CAPABILITY 0-24 KW

DEEP-FRYER SAFETY GAS THERMOSTAT — EUROSIT — POWER CONTROL CAPABILITY 0-15 KW

OVEN SAFETY GAS THERMOSTAT — MINISIT — POWER CONTROL CAPABILITY 0-24 KW

OVEN SAFETY GAS THERMOSTAT — EUROSIT — POWER CONTROL CAPABILITY 0-15 KW

OVEN SAFETY GAS THERMOSTAT — 25.ST- POWER CONTROL CAPABILITY 0-12 KW

SERIES 92 — 92.WOK 18 — PROFESSIONAL WOK BURNER 18 KW

• Designed for high powered chimese wok professional gas cookers
• Contructed in cast iron and brass
• Suitable for heavy — duty use
• Multigas
• Wide range of power control: from 3.5 Kw to 16 Kw
• Extremely high efficiency-reduced gas consumption
• Pilot safety device with thermocouple
• Conformity with EN 203 standard

SERIES 92 — 92.WOK 13 — PROFESSIONAL WOK BURNER 13 KW

• Designed for high powered chimese wok professional gas cookers
• Contructed in cast iron and brass
• Suitable for heavy — duty use
• Multigas
• Wide range of power control: from 3.0 Kw to 13 Kw
• Extremely high efficiency-reduced gas consumption
• Pilot safety device with thermocouple
• Conformity with EN 203 standard

Professional tubular gas burner designed for professional tilting pan equipments.
With an unitary power of 12.0KW for each single tube, these burners are assembled in battery of 2 or 3 (or more) tubular burners under the pan, for a total power up to 48kw.
Multigas burners: our burners work properly with all kind of gases, just adjusting the injectors, the primary air flow regulator and the pilot flame.
Control: see gas tap 23S

SERIES 93 — 93.BSF 2 — INOX TUBULAR BURNER 8.0 KW

• Designed for professional gas oven Series 900
• Contructed in stainless steel AISI 430
• Suitable for heavy — duty use
• Multigas
• High efficiency
• Conformity with EN 203 standard

SERIES 93 — 93.BSF 1 — INOX TUBULAR BURNER 6.0 KW

• Designed for professional gas oven Series 700
• Contructed in stainless steel AISI 430
• Suitable for heavy — duty use
• Multigas
• High efficiency
• Conformity with EN 203 standard

SERIES 65 — SEALED SET

• Designed for professional gas cookers
• Contructed in cast iron, alluminium and brass
• Suitable for heavy — duty use
• Multigas — high efficiency
• Low height — easy to intall
• Available nichel plated or enamel coated
• Sizes:
— «C» burner 3.0 — 3.5 Kw
— «D» burner 4.5 — 5.0 Kw
— «E» burner 7.0 — 8.0 Kw
— «EL» burner 8.5 — 9.5 Kw
— «WOK» burner 12.0 Kw
• Conformity with EN 203 standard

SERIES 65 — HORIZONTAL SET

• Designed for professional gas cookers
• Contructed in cast iron, alluminium and brass
• Suitable for heavy — duty use
• Multigas — high efficiency
• Low height — easy to intall
• Available nichel plated or enamel coated
• Sizes:
— «C» burner 3.0 — 3.5 Kw
— «D» burner 4.5 — 5.0 Kw
— «E» burner 7.0 — 8.0 Kw
— «EL» burner 8.5 — 9.5 Kw
— «WOK» burner 12.0 Kw
• Conformity with EN 203 standard

SERIES 65 — VERTICAL SET

• Designed for professional gas cookers
• Contructed in cast iron, alluminium and brass
• Suitable for heavy — duty use
• Multigas — high efficiency
• Available nichel plated or enamel coated
• Sizes:
— «C» burner 3.0 — 3.5 Kw
— «D» burner 4.5 — 5.0 Kw
— «E» burner 7.0 — 8.0 Kw
• Conformity with EN 203 standard

SERIES 04 — PILOT FLAME VERSION

• Designed for professional gas cookers
• Contructed in cast iron and brass
• Multigas — High efficiency
• Available nichel plated or enamel coated
• Sizes:
— «B» burner 2.5 Kw
— «C» burner 3.5 Kw
— «D» burner 6.0 Kw
• Conformity with EN 203 standard

SERIES 04 — SPARK PLUG IGNITION VERSION

• Designed for professional and household gas cookers
• Contructed in cast iron and brass
• Multigas — High efficiency
• Available nichel plated or enamel coated
• Sizes:
— «A» burner 1.5 Kw
— «B» burner 2.5 Kw
— «C» burner 3.5 Kw
— «D» burner 6.0 Kw
• Conformity with EN 203 standard

SERIES 65 — 65.BFR 2 — DEEP FRYER SNACK BURNER 3.5 KW

• Designed for professional deep fat flyer
• Contructed in cast iron
• Suitable for heavy — duty use
• Multigas
• High efficiency
• Conformity with EN 203 standard

SERIES 65 — 65.BFR 1 — DEEP FAT FRYER PROFESSIONAL BURNER 7.0 KW

• Designed for professional deep fat flyers
• Contructed in cast iron
• Suitable for heavy — duty use
• Multigas
• High efficiency
• Conformity with EN 203 standard

SERIES 93 — 93.BFT2 — INOX TUBULAR BURNER 4,0KW

• Designed for professional fry-top or Teppanyaki Series 900
• Constructed in stainless steel AISI 430
• Suitable for heavy-duty use
• Multigas
• High efficiency
• Conformity with EM203 standard

SERIES 93 — 93.BFT1 — INOX TUBULAR BURNER 3,5KW

• Designed for professional fry-top or Teppanyaki Series 700
• Constructed in stainless steel AISI 430
• Suitable for heavy-duty use
• Multigas
• High efficiency
• Conformity with EM203 standard

Provide gas inlet from gas taps to gas burners.

We offer gas feeding tubes of various shapes and sizes.

Material: aluminum, copper, steel.

Thermocouple with nut can be made of different length up to 1500 mm. depending on the needs of the customer.

Thermocouple with faston connection can be made of various length up to 1500 mm. depending on the needs of the customer.

Terminal blocks are designed to connect wires together. They are different by installation and overall dimensions, raw material (ceramic or plastic), connection type (screw, faston), technical characteristics. Our company can offer terminal blocks almost of any shape and color, with any type of connection and heat resistance up to 300C, with loads up to 30A per a contact

Switchblock of electrical igniter is used to signal the block about need in spark formation. Thus, when you turn the gas switching handle, spark formation is automatically occured. We offer switchblocks of various types (push, rotary) and sizes. Number of outputs: 1 to 8. Specifications:  0.1A, 250V. Thermal resistance: 120 C.  Switchblock can operate in a clockwise and counterclockwise direction, for ignition 2 different typesof burners (ex.: stove and oven) independently of each other.

Spark plug is used to ignite the gas in the gas burners on household stoves.

Our company can offer spark plugs of various  size, shape  and also cable length.

Porous silicone sealers. Silicone sealers are designed for convenient and efficient hermetic sealing of connectors of various high-temperature devices, as well as for noise and vibration insulation. Main specifications: operating temperature range: -60 / +200-400°C. High atmosphere and weather resistance, no toxicity. High flexibility, bending resistance. Good resistance to the cut expansion and compressive deformation. Siliconesealers are produced in the form of long length wire harnesses, tubes, rectangular, segmental or other profiles, in the form of ring structures, in the form of molded articles, as well as with the combined structure comprising different types of rubbers. They are used in the food industry, smoking, proofing and drying ovens, in auto industry, aviation, vessel building, they are also used as insulation and sealing of heat and gaz output equipment. Sealers have differences in characteristics (color, material, shape and heat resistance) depending upon its application.

Silicone O- rings, offered by our company, are used in pneumatic systems of machines, heat engineering. They are used: to seal both mobile and stationary hydraulic connections in hostile environments at extreme temperatures; to seal in pneumatic devices. They withstand pressures up to 50 MPa. Applied for vibration damping. They are also used as the insulating gap against dust, light, moisture, heat, etc. Main features: increased resistance to high and low temperatures: -60°C to + 260°C. Resistance to sea and fresh water, salt solutions, alcohols, phenols, mineral oils, acids and alkalis, hydrogen peroxide, ozone, vacuum, radiation exposure, electric fields and discharges (up to 20 — 30 kV/mm). The properties of silicone are not changed when exposed to sunlight and air. Inertial reaction — contact with food is possible. Increased resistance to aging and to chemical environment.

Backlight lampswith ceramic holder, offered by our company,  have the following characteristics: rated voltage — 250V; material — ceramic; Lamp power — 15W; Maximum temperature is up to 300C

Our company offer grill motor and broiling rackwhich have the following characteristics: voltage: 220V — 240V, 50/60Hz; power: 5W — 6W; speed: 2 rpm; temperature: 125°C; material — stainless steel

Thermostatic tap (it is used to maintain the desired temperature in the ovens of gas stoves). We can offer both one-way and two-ways taps. Equipped with a screw to adjust for natural or LP gas.

Tap without a system of «gas-control» (it is designed for turning on, feeding and ensuring a smooth flow control of hydrocarbon gas in household gas stoves). Can be used in free-standing gas stoves and in built-in surfaces. Equipped with a screw to adjust for natural or LP gas.

Tap with a system of «gas-control» (in the tap there is a valve in front of the burner, when thermocouple is heated with fire from the burner, valve opens and gas flows, when flame failures, gas feeding is stopped). Can be used in detached gas stoves and in built-in surfaces. Equipped with a screw to adjust for natural or LP gas.

Our company can offer gas burners of low, medium and high power. Burners can be supplied with a flame spreader made of Pyral material, which can withstand temperature up to + 350°C. They can also be equipped with lids with a matte or glossy finish and accessories: such as screws, nuts and injectors of various power for natural gas and LPG.

Electromechanical timers, offered by our company, are designed to control electrical appliances on a schedule. They are used to turn on/off lighting, etc. They are also used in other electrical devices during the daily or weekly cycle according to established program. There are mechanical, electrical, electromechanical timers. They differ from each other by dimensions, material, programming timing.

Igniter isused to convert the electric current to supply spark plug. We offer igniters of different sizes, with different fasteners, with/without filter, with/without earth grounding. Available number of outputs: from 2 to 8. Voltage: 1,5 VDC and 12 VDC, 110 VAC and 220 VAC. Flash frequency: 1 — 25 Hz. Thermal resistance: 120 C

Connectors (fastons) are used to connect wires of different cross-sections with each other.Besides, they are also used for more reliable fastening of wire to the terminal blocks (terminals). Connectors differ in size, shape, resistance and material. Our company can offer fastons of different materials, different sizes, with/without insulating caps. They can also be tinned or not.

Terminal blocks are designed to connect wires together. They are different by installation and overall dimensions, raw material (ceramic or plastic), connection type (screw, faston), technical characteristics. Our company can offer terminal blocks almost of any shape and color, with any type of connection and heat resistance up to 300C, with loads up to 30A per a contact.

Silicone O- rings, offered by our company, are used in pneumatic systems of machines, heat engineering. They are used: to seal both mobile and stationary hydraulic connections in hostile environments at extreme temperatures; to seal in pneumatic devices. They withstand pressures up to 50 MPa. Applied for vibration damping. They are also used as the insulating gap against dust, light, moisture, heat, etc. Main features: increased resistance to high and low temperatures: -60°C to + 260°C. Resistance to sea and fresh water, salt solutions, alcohols, phenols, mineral oils, acids and alkalis, hydrogen peroxide, ozone, vacuum, radiation exposure, electric fields and discharges (up to 20 — 30 kV/mm). The properties of silicone are not changed when exposed to sunlight and air. Inertial reaction — contact with food is possible. Increased resistance to aging and to chemical environment.

Porous silicone sealers. Silicone sealers are designed for convenient and efficient hermetic sealing of connectors of various high-temperature devices, as well as for noise and vibration insulation. Main specifications: operating temperature range: -60 / +200-400°C. High atmosphere and weather resistance, no toxicity. High flexibility, bending resistance. Good resistance to the cut expansion and compressive deformation. Siliconesealers are produced in the form of long length wire harnesses, tubes, rectangular, segmental or other profiles, in the form of ring structures, in the form of molded articles, as well as with the combined structure comprising different types of rubbers. They are used in the food industry, smoking, proofing and drying ovens, in auto industry, aviation, vessel building, they are also used as insulation and sealing of heat and gaz output equipment. Sealers have differences in characteristics (color, material, shape and heat resistance) depending upon its application.

Signal fittings is used in adjustment and control circuits, which are installed in the electrical and automatic devices.

Signal indicating devices are easy to install and have a wide range of colors.

Signal fittings can be of different types (X-proof, heat-resistant, LED) and have different characteristics (body material, its diameter, thickness of the mounting panel and type of voltage used).

We make an order according to customer’s specifications

Switchblock of electrical igniter is used to signal the block about need in spark formation. Thus, when you turn the gas switching handle, spark formation is automatically occured. We offer switchblocks of various types (push, rotary) and sizes. Number of outputs: 1 to 8. Specifications: 0.1A, 250V. Thermal resistance: 120 C. Switchblock can operate in a clockwise and counterclockwise direction, for ignition 2 different typesof burners (ex.: stove and oven) independently of each other.

Backlight lampswith ceramic holder, offered by our company, have the following characteristics: rated voltage — 250V; material — ceramic; Lamp power — 15W; Maximum temperature is up to 300C

Cast iron hot plates for household electric stoves.

They successfully passed testing in the number of factories of the Russian Federation.

Diameter: 145mm and 180mm.
Power: 1000W to 2000W.

t is possible to produce the whole hot plates as well as their components according to customer drawings.

Manufacturing of express hot plates is also possible.

Tubular electrical heaters of various sizes and capacities for household electric stoves.
Production according to customer drawings is possible.

We offer glass-ceramic panels for induction hot plates of all kinds of sizes, any shape, as well as the number of burners. In addition, our glass-ceramic panels successfully passed testsof strength (Pan Drop Test). Heat resistance is up to 800C. Thermal conductivity λ (100°C) is about 1.7 W / (m ⋅ K)

Electromechanical timers, offered by our company, are designed to control electrical appliances on a schedule. They are used to turn on/off lighting, etc. They are also used in other electrical devices during the daily or weekly cycle according to established program. There are mechanical, electrical, electromechanical timers. They differ from each other by dimensions, material, programming timing.

Our company can offer convection motors of the following characteristics:
Voltage: 100-240VAC
Frequency: 50 / 60HZ
Power: 5-100W
Insulation type: A / E / B / F / H
Noise: no more than 43Db (a)
Lifecycle: 5000-10000 hours
Core thickness: 8-40mm
Shaft diameter (mm): 2.5, 3.17, 4.0, 4.6, 5.0, 5.5, 6.0, 6.35
Variousfastening options.

More often it is used as a second stage of overheat protection when operational thermostat (themperature controller) does not disconnect the appliance when the set limit temperature is reached.

Limitative thermostat is actuated when limit temperature is reached — it leads to safety (emergency) opening of a circuit with the ability to turn it on manually after the fault handling.

1-pole temperature controller: when set temperature is reached, controller automatically breaks electric circuit, when temperature is lowered — circuit is again connected, thereby it helps to keep temperature of controlled environment in constant narrow range.

Fields of application:

— Accumulation boilers, water heaters

— Washing machines

— Electric ovens, kitchen stoves

— Refrigerators

Switching current: up to 25A;

Control range: up to 355 C;

Number of operations: up to 100 000 cycles.

Capillary length: 250-2000 (2500)

Sensing element: CU: Ø5, Ø6, Ø6,5, Ø8, inox: Ø3, Ø4, Ø6

3-poles temperature controller: when set temperature is reached, controller automatically breaks electric circuit, when temperature is lowered — circuit is again connected, thereby it helps to keep temperature of controlled environment in constant narrow range.

Fields of application:

— Accumulation boilers, water heaters

— Washing machines

— Electric ovens, kitchen stoves

— Refrigerators

Switching current: up to 25A;

Control range: up to 355 C;

Number of operations: up to 100 000 cycles.

Capillary length: 250-2000 (2500)

Sensing element: CU: Ø5, Ø6, Ø6,5, Ø8, inox: Ø3, Ø4, Ø6

Such thermostat can also be used for regulating even with three different temperature settings!

2-poles temperature controller: when set temperature is reached, controller automatically breaks electric circuit, when temperature is lowered — circuit is again connected, thereby it helps to keep temperature of controlled environment in constant narrow range.

Fields of application:

— Accumulation boilers, water heaters

— Washing machines

— Electric ovens, kitchen stoves

— Refrigerators

Switching current: up to 25A;

Control range: up to 355 C;

Number of operations: up to 100 000 cycles.

Capillary length: 250-2000 (2500)

Sensing element: CU: Ø5, Ø6, Ø6,5, Ø8, inox: Ø3, Ø4, Ø6

Such thermostat can also be used for regulating even with two different temperature settings!