Component parts for gas stoves | Product Categories

Igniter isused to convert the electric current to supply spark plug. We offer igniters of different sizes, with different fasteners, with/without filter, with/without earth grounding. Available number of outputs: from 2 to 8. Voltage: 1,5 VDC and 12 VDC, 110 VAC and 220 VAC. Flash frequency: 1 — 25 Hz. Thermal resistance: 120 C

Electrical igniter

Electromechanical timers, offered by our company, are designed to control electrical appliances on a schedule. They are used to turn on/off lighting, etc. They are also used in other electrical devices during the daily or weekly cycle according to established program. There are mechanical, electrical, electromechanical timers. They differ from each other by dimensions, material, programming timing.

Electromechanical timer

Our company can offer gas burners of low, medium and high power. Burners can be supplied with a flame spreader made of Pyral material, which can withstand temperature up to + 350°C. They can also be equipped with lids with a matte or glossy finish and accessories: such as screws, nuts and injectors of various power for natural gas and LPG.

Gas burner

Provide gas inlet from gas taps to gas burners.

We offer gas feeding tubes of various shapes and sizes.

Material: aluminum, copper, steel.

Gas feeding tubes

Our company offer grill motor and broiling rackwhich have the following characteristics: voltage: 220V — 240V, 50/60Hz; power: 5W — 6W; speed: 2 rpm; temperature: 125°C; material — stainless steel

Grill-motor

Backlight lampswith ceramic holder, offered by our company, have the following characteristics: rated voltage — 250V; material — ceramic; Lamp power — 15W; Maximum temperature is up to 300C

Lampholders

Porous silicone sealers. Silicone sealers are designed for convenient and efficient hermetic sealing of connectors of various high-temperature devices, as well as for noise and vibration insulation. Main specifications: operating temperature range: -60 / +200-400°C. High atmosphere and weather resistance, no toxicity. High flexibility, bending resistance. Good resistance to the cut expansion and compressive deformation. Siliconesealers are produced in the form of long length wire harnesses, tubes, rectangular, segmental or other profiles, in the form of ring structures, in the form of molded articles, as well as with the combined structure comprising different types of rubbers. They are used in the food industry, smoking, proofing and drying ovens, in auto industry, aviation, vessel building, they are also used as insulation and sealing of heat and gaz output equipment. Sealers have differences in characteristics (color, material, shape and heat resistance) depending upon its application.

Porous silicone sealers

Silicone O- rings, offered by our company, are used in pneumatic systems of machines, heat engineering. They are used: to seal both mobile and stationary hydraulic connections in hostile environments at extreme temperatures; to seal in pneumatic devices. They withstand pressures up to 50 MPa. Applied for vibration damping. They are also used as the insulating gap against dust, light, moisture, heat, etc. Main features: increased resistance to high and low temperatures: -60°C to + 260°C. Resistance to sea and fresh water, salt solutions, alcohols, phenols, mineral oils, acids and alkalis, hydrogen peroxide, ozone, vacuum, radiation exposure, electric fields and discharges (up to 20 — 30 kV/mm). The properties of silicone are not changed when exposed to sunlight and air. Inertial reaction — contact with food is possible. Increased resistance to aging and to chemical environment.

Silicone O-Rings

Spark plug is used to ignite the gas in the gas burners on household stoves.

Our company can offer spark plugs of various size, shape and also cable length.

Spark plug

Switchblock of electrical igniter is used to signal the block about need in spark formation. Thus, when you turn the gas switching handle, spark formation is automatically occured. We offer switchblocks of various types (push, rotary) and sizes. Number of outputs: 1 to 8. Specifications: 0.1A, 250V. Thermal resistance: 120 C. Switchblock can operate in a clockwise and counterclockwise direction, for ignition 2 different typesof burners (ex.: stove and oven) independently of each other.

Switchblock of electrical igniter